Use the compatibility table above to find your camera brand and model. Each accessory type is marked as Compatible, Check model, Check size, Not applicable, Not recommended, or Not tested yet. Please check both the table and the selected product page before ordering.

“Compatible” means AKuser has confirmed that this accessory type can be used with the listed camera model. Compatibility still applies to the selected product version, size, and design series, not necessarily every AKuser accessory in that category.

“Check model” means the accessory type may work, but compatibility depends on the specific camera model, generation, or body design. Similar camera models may still require different accessory versions.

“Check size” means the accessory may fit, but the final result depends on dimensions such as shutter thread, button diameter, strap lug size, hardware size, or available body clearance.

“Not applicable” means the accessory type does not match the camera’s structure. For example, screw-in shutter buttons are not suitable for cameras without a compatible threaded shutter release.

“Not recommended” means the accessory may be physically attachable in some cases, but AKuser does not recommend it for that camera setup because of weight, body size, handling, or usage risk.

No. AKuser accessories are not universal accessories. Compatibility depends on the camera brand, camera model, accessory type, and selected product version.

No. AKuser accessories are third-party camera accessories. AKuser is not affiliated with Leica, Fujifilm, Sony, Canon, Nikon, Panasonic, Ricoh, Hasselblad, or other camera brands mentioned on this page. Camera brand names are used only to describe compatibility.

Selected AKuser screw-in shutter buttons are compatible with Leica Q3 series cameras. Please choose the correct design series and size on the product page before ordering.

AKuser screw-in shutter buttons are not applicable to Leica Q2. The Q2 body does not use the threaded shutter release structure required for AKuser screw-in shutter buttons.

Selected AKuser shutter buttons, hot shoe covers, thumb grips, and straps may be used with Leica M10 and M11 series cameras. Thumb grips are designed only for selected M10 and M11 bodies, so please check the product version before ordering.

Selected AKuser hot shoe covers are compatible with selected Leica camera models. Hot shoe cover fit depends on the AKuser cover version and the camera model, so please check the compatibility table before ordering.

Selected AKuser screw-in shutter buttons can fit Fujifilm X100VI when the selected button matches the camera’s threaded shutter release and the preferred button size.

AKuser hot shoe cover compatibility depends on the product’s hot shoe slot dimensions, outer curve, and the model-specific fit between the cover and the camera’s hot shoe structure. It is not determined by electronic contacts or camera top plate height.

The back clearance design helps the hot shoe cover reduce unnecessary contact with the camera’s hot shoe area. It is made to improve the installation feel, reduce friction during installation or removal, and create a cleaner fit on selected camera models.

AKuser straps are better suited for compact and mid-weight camera setups. They are not recommended for overly heavy or bulky camera setups, such as Hasselblad X2D-type bodies.

Ricoh GR compatibility should be checked mainly for hot shoe covers. GR III, GR IIIx, and GR IV use different model generations, so hot shoe cover fit should be confirmed by model before purchase.

Ricoh GR cameras do not use the typical threaded shutter release structure required for AKuser screw-in shutter buttons. For Ricoh GR cameras, the main compatibility category is hot shoe cover fit.

If your camera model is not listed, contact AKuser support with your camera model and the accessory you want to use. Do not assume compatibility from a similar camera model.